Speco Technologies HT-INTD3 - Manual (Page 17)

Operating your camera –
MOTION DETECTION
(4) Whenever your camera detects motion, THE WORDS “motion detected’
will appear on the screen.
① Press the SET button to display the setup menu and move the arrow
indicator to ‘MOTION’ using the UP and DOWN button.
② SET ‘MOTION’ to the desired mode using the LEFT or RIGHT button.
Max. Min.
▶ OFF : Deactivation
▶ ON : MOTION. activated
-Press SET button.
-Move the arrow indicator to ‘AREA SET’ using UP and
DOWN button, and then press the SET button.
- Set the areas you want to observe.
30 29