Speco Technologies HT-INTD3 - Manual (Page 9)

Operating your camera Operating your camera -
LENS
1. Press the SET button to access the SETUP mode.
● SETUP menu is displayed on the monitor screen.
1) Setting up the LENS
Select the lens by pressing the RIGHT button.
①
On the SETUP menu screen, move the arrow indicator to the lens
using the UP or DOWN button.
② Select the desired feature using the LEFT or RIGHT button.
2. Select the desired feature using the UP or DOWN button.
● Each time you press the UP or DOWN button, the arrow
indicator moves up or down.
● Move the arrow indicator to the desired feature item.
3. Change the status of the selected feature using the LEFT
or RIGHT button.
4. When completed, move the arrow indicator to ‘EXIT’ and press
the SET button.
Notes
•
● You can access the submenu by using SET button.
•
● For the mode with ’---’, you may not access submenu.
13 14