Speco Technologies HT-INTD3 - Manual (Page 4)

PRECAUTIONS PACKAGE CONTENTS
• HT-INTD CAMERAS SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
• TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROER POWER CABLE.
• DO NOT CELAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO
CLEAN THE DOME COVER
• THERE ARE NO USER-SERVIEABLE PARTS INSIDE. PLEASE
DO DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE
INITIAL ADJUSTMENTS.
• PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
• PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK.
• PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA.
• PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
• Please make sure that the following items are included
in the package:
1 HT-INTD Camera
1 Remote Controller
1 IR Receiver
4 Mounting Screws
1 Allen Wrench
1 Allen Bit
1 Power Cable Adaptor (for optional use)
Please leave this manual with the end-user for future
reference.
3 4