Maintenance – SPX Cooling Technologies Cooling Tower Marley MD User Manual

Page 24

Advertising
background image

24

sheave to determine the diameter. If diameter markings are unreadable,
measure the sheave diameter at the bottom of the sheave grooves.
New belts (operating less than 8 hours) should be tensioned to the maxi-
mum value. Tension after this period should use no less than the minimum
value. If the belt span was measured in inches, then use the pounds of
force values. If the belt span was measured in centimeters, then use the
kilograms of force values. If specific tensioning instructions are provided
with your tensioning tool, those instructions should be used instead.

Sheave Alignment

Always shut off electrical power to the tower fan motor prior to
performing any inspections that may involve physical contact with
the mechanical or electrical equipment in or on the tower. Lock out
and tag out any electrical switches to prevent others from turning
the power back on. Service personnel must wear proper personal
protective clothing and equipment.
• The motor sheave is to be positioned as close as possible to the motor

in order to minimize torque on the motor bushings.

• The motor and fan sheaves may have grooves that are not used. The

bottom surface of the motor and fan sheaves must be aligned within

1

8

" of each other and level within

1

2

° (

1

8

" in 12") in order to not adversely

affect belt and sheave life.

• Alignment can be achieved by placing a straight edge across the top

of the sheaves making sure that it is level and measuring down to the
bottom surface of both sheaves at four points. See photo.

• The number of grooves on the motor and fan sheaves may not match

each other, or the number of grooves on the belt. Always install the
belts on the highest grooves on the fan sheave. Doing so will reduce
the force on the fan shaft bearings, thus increasing their life.

Maintenance

Warning

Motor Sheave

diameter

Used V-Belt

minimum

New V-Belt

maximum

3.4" - 4.2"

4.9 lb

7.2 lb

85cm - 105cm

2.2 kg

3.3 kg

4.4" - 5.6"

7.1 lb

10.5 lb

106cm - 140cm

3.2 kg

4.8 kg

5.8" - 8.6"

8.5 lb

12.6 l

141cm - 220 cm

3.9 kg

5.7 kg

Advertising