Sony PCV-J200 - Manual (Page 80)

VAIO Computer User Guide
80
❑ Increasing the system memory may also help. The computer has two
memory slots. For memory upgrades, use only 3.3V 64-bit PC-133 SDRAM
DIMM modules. For information on installing memory, please see the
section, “Adding Memory” .
Topic: My i.LINK
®
device does not appear on the desktop.
1 Turn off and disconnect your device.
2 Reconnect your device.
3 Turn on your device.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode.
When this occurs, follow the procedures below to reset the printer connection:
1 Right-click My Computer on the desktop and then select Properties.
2 Click the Device Manager tab.
3 Select Refresh, and then click OK.
4 The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1 Click My Computer on the desktop.
2 Click on Control Panel and then click on System.
3 Click the Device Manager tab.
4 Click on the Network Adapters category, and then select “Realtek RTL8139
(A/B/C/8130) PCI Fast Ethernet NIC.”
5 Click the Properties button.
6 Remove the checkmark from the option, “Disable in this hardware profile.”
7 Click OK.
8 Close the Control Panel window.