Sanyo QXXAVC922---P - Manual (Page 55)


E-mail setting
This product has an E-mail function which can send an alert message to users or an
administrator if it detects an abnormality on the projector or run out of the life span of
the lamp. Click E-mail Setting on the main menu and follow the below steps.
Item Description
SMTP server* 1 .......... Sets server name or IP address of the SMTP server
Administrator
address ......................Sets e-mail address of administrator
Add e-mail
address ...................... Sets e-mail address of the user to send a mail when the
projector has an abnormality.
1
Setting SMTP server and administrator address
Set the server name or IP address of the SMTP server* 1 and administrator address. The administrator
address is set to "Reply-To" address of the message sent from the projector.
*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this
SMTP server address. When the server name for SMTP server is used, DNS must be set up to activate
the e-mail function.(+p.51)
✐ If the projector sends an alert message due to the abnormality on the projector but the SMTP server is
down in some other reason, the message will not be sent. In that case, the message "Unable to connect to
server." will be displayed on the setting page. To clear this message, set up SMTP server address again.
✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.
✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your network
environment.
E-mail setting