Sanyo QXXAVC922---P - Manual (Page 72)


Chapter 7 Controlling the projector
Item Description
Language ................. Sets the language display of projector's on-screen
display menu.
Auto setup ............... Executes the Auto PC Adj, and Auto Keystone function
below according to the each setting after clicking Start
button.
Auto PC Adj. .......Sets Auto PC Adjustment mode.
Auto Keystone ...Sets Auto Keystone mode.
Blue back .................. Sets the blue screen background when no signal input.
Display ....................... Switches on or off the on-screen menu display on the
screen.
Countdown off .... Displays image during the starting up.
Item Description
Freeze......................... Sets the image to freeze mode.
Power
management .......... Sets into the selected power management mode if the
input signal is interrupted and no control key is pressed
for the specified period of time.
* The specified time can be set 1 to 30 min.
On start ..................... Sets the power-on mode when the AC cord is con-
nected to the outlet.
Lamp control ........... Selects lamp control mode.
Pointer .......................Sets the pointer form.
Remote control .......... Sets the remote control code.
Item Description
Logo ........................... Sets the logo display on the screen during the startup.
Ceiling ........................ Sets the image top/bottom and left/right reversed.
Rear ............................. Sets the image left/right reversed.
Input search .............Sets the auto-input signal detection mode.
Standby mode ........ Sets the network function enable or disable in the
standby mode.
Normal .....Enable
Eco ............Disable
No show .................... Sets the black out image temporarily.