Sanyo QXXAVC922---P - Manual (Page 84)


Chapter 7 Controlling the projector
Viewer auto setting all together
"Viewer auto display" can be set all together. Set "ON" the multi
control setting and select [3] Auto display from Viewer sub menu
(selected by ‘Multi-control’ - “Network Viewer” menu). Set the dis-
play time periods and repeat times for the auto image display. After
clicking Start button, the registered projectors start playing back
the auto image display in sequential.
✐ For further information of the Auto display, see "Using the network
viewer function". (+p.120)
✐ This is effective only if the multi control item of the registered pro-
jector is set to either "Both control" or "Visual control".