SOYO SY-P4I845PE - Manual (Page 13)

Hardware Installation SY-P4I845PE
9
Chapter 2
HARDWARE INSTALLATION
Congratulations on your purchase of SY-P4I845PE Motherboard. You are
about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket mPGA478 processor with built-in CPU cooling fan.
2. DDR RAM memory module(s)
3. Computer case and chassis with adequate power supply unit (350 Watt)
4. Monitor
5. Keyboard
6. Pointing Device (mouse)
7. Disk Drives: HDD, CD-ROM, Floppy drive…
8. External Peripherals: Printer, and Modem- (optional)
9. VGA Card (AGP 1.5V only, PCI)
Note: This M/B can only support AGP 1.5V VGA card only!
2-2 INSTALLATION GUIDE
We will now begin the installation of the Motherboard. Please follow the
step-by-step procedure designed to lead you to a complete and correct
installation.
Step1- Install the Central Processing Unit (CPU).
Step2- Install memory modules.