SOYO SY-P4I845PE - Manual (Page 91)

HighPoint hpt371 Driver Installation SY-P4I845PE
87
6. Check “search removable media …..” and then click next
7. Choose the driver for Win XP
8. During
installation, Win XP will prompt you to insert the
RAID driver diskette
9. Browse to the directory that contains the missing file
(D:\raid\hpt371\121\Winxp). If you click yes without
browsing, Win XP will not find the .inf file
10. Follow the system prompt to finish the installation, and
restart the computer.
Driver Install During OS Installation
Driver install during Windows NT4.0 installation
1. Go to “d:\raid\hpt371\121\” diretories, (assuming that
your CD-ROM is drive d) copy all the files and
directory to a floppy disk.
2. Press F6 key when the system prompts Setup is
inspecting your computer’s hardware configuration.
3. Press F6 key, the installation will continue. Later, the
installation program will remind the user to press the S
key to specify other devices. Please press the S key.
4. In the follow-up Device Type window, select Other item,
then press Enter to confirm.
5. The installation program will prompt users to insert the
floppy disk of the driver. Please insert it and then press
Enter to confirm.
6. In the follow-on window, select HPT371 UDMA/ATA133
Controller , then press Enter to confirm.
7. The next screen will list the devices to be installed, in
which HPT371 UDMA/ATA133 Controller item should be
included. (If users want to install other devices, please do
so at this time. If all devices have been successfully
installed, please go to next.)
8. Press Enter to continue the installation of Windows