SOYO SY-P4I845PE User Manual
Page 92
HighPoint hpt371 Driver Installation
SY-P4I845PE
88
NT4.0.
Install driver during Windows 2000 installation
1. Go
to
“D:\raid\hpt371\121\” directory, (assuming that
your CD-ROM is drive d) copy all the files and
directories to a floppy disk.
2. If Windows 2000 is installed from the floppy drive, please
let the installing program run automatically. If Windows
2000 is installed from the CD-ROM drive, please press the
F6
key when the message
Press F6 if you need to install
third party SCSI or RAID driver
appears.
3. Press
the
S
key to specify additional devices when the
Windows 2000 Setup
window appears.
4. Insert the floppy disk with the driver, then press
Enter
to
continue.
5. The system will ask whether to install the driver under
WinNT
or under
Windows 2000
, please select to install the
driver under
Windows 2000.
6. In the next screen (Device Type), please select
Other
and
press
Enter
to continue.
7. The next screen will list the devices to be installed, in which
HPT371 UDMA/ATA133 Controller
item should be
included (If users want to install other devices, please do so
at this time. If all devices have been successfully installed,
please go to next.)
Install driver during Windows XP installation
1.
Go
to
“D:\raid\\hpt371\121\” directory, (assuming that
your CD-ROM is drive d) copy all the files and
directories to a floppy disk.
2. Booting from CD-ROM, when the
Windows XP Setup’s
blue screen appears and prompts the user to press the F6
key to install third party SCSI or RAID driver, please press