SOYO SY-P4I845PE - Manual (Page 89)

HighPoint hpt371 Driver Installation SY-P4I845PE
85
Chapter 7
HIGHPOINT HPT371 DRIVER INSTALLATION
Installing Driver on an Existing System
9x/ME Manual Installation
If Windows can not find new hardware, the driver can be installed
through the following steps:
1. Shut down all programs.
2. Click
Start --> Setup --> Control Panel , then double-click on
Add New Hardware icon.
3. Click Next in the popup window to continue.
4. A dialog box will appear and ask whether to let windows
search for new hardware. Select No, I want to select the
hardware from a list , and then click Next to continue.
5. Hardware of different types will be shown in the follow-on
window. Select SCSI Controllers and then click Next to
continue.
6. A dialog box will pop up, input the path of the SOYO CD.
D:\Raid\Hpt371\121\Win98_ME . (Where D: is your
CDROM drive) Then click OK to continue.
7. In the next window, the driver you need to install will appear,
just click Next to continue.
8. Follow the system prompt to install the driver. When
finished, restart the computer.
Windows NT 4.0
1. Click Start --> Setup --> Control Panel , then double-click on
the SCSI Adapter icon.
2. In the follow-on window, select Driver item, then click Add