SOYO SY-P4I845PE - Manual (Page 53)

BIOS Setup Utility SY-P4I845PE
49
Typematic Settings Setting Description Note
Typematic Rate 6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec) Choose the rate at which a
character is repeated when
holding down a key. Default
Typematic Delay 250 (msec)
500 (msec)
750 (msec)
1000 (msec) Choose how long after
you press a key down the
character begins
repeating. Default
3-3.8 Security Option
Use this feature to prevent unauthorized system boot-up or use of BIOS
Setup. The following table describes the security settings.
Setting Description Note
System Each time the system is booted, the
password prompt appears.
Setup If a password is set, the password
prompt only appears when you
attempt to enter the BIOS Setup
program. Default
Disabled
Enabled
Enabled the Advanced Programmable
Interrupt Controller (APIC) mode.
Default
1.1 Default
Security Option
APIC Mode
MPS Version
Control for OS 1.4
Allows you to choose the Multi
Processor Specification (MPS)
version.
Other Control Options
Other Control
Options
Setting Description Note
OS2 When using an OS2 operating
system. OS Select for
DRAM>64MB
Non-OS2 When using another,
non-OS2 operating system.
Default