Sony CMD-Z100 - Manual (Page 17)

17
Getting Started
display
to the connector on the
phone (the thumb indent
should face upwards)
Charging the battery
Connect the AC adapter to the phone and the
other end to a standard 120V AC outlet as
illustrated below. The charging time is
approximately 3.5 hours. You can charge the
battery pack with the phone turned on, but
charging will take longer.
When the power is turned on
As the battery pack charges, the battery icon
(
) indicates that the phone is charging.
When the power is turned off
The message “Battery is Charging” is
displayed, and
pulses. When the battery
pack is fully charged, the message “Charging is
Complete” is displayed, and
stops pulsing.
Notes
• If you make or receive a call when the battery
pack is not charged sufficiently, the call will be
cut off. In that case, you will hear an alarm,
indicating that the battery is low.
• You can turn on the phone without the battery
pack, but you cannot make or receive a call,
even if you connect the AC adapter to an AC
outlet.
to an
AC
outlet
CM-Z100/11-22final 3/3/98, 9:41 AM 17