Sony CMD-Z100 - Manual (Page 40)

40
3 Turn up to select “Recall Loc#,”
then push .
The Phone Book entry stored in the
selected memory location is displayed.
If the entered location is empty, this is
indicated on the display. After a few
seconds, the standby display reappears.
Tip
You can also use the Directory menu to search the
Phone Book by memory location (see page 67).
Searching for a phone number
The phone lists all entries that contain the
entered digit(s).
1 On the standby display, enter at
least three digits of the phone
number you want to find.
2 Push .
The Options menu appears.
3 Turn up to select “Find
Number,” then push .
The Phone Book lists and displays all
entries matching the entered digits.
Depending on the Sort Book setting (see
page 81), the entries are listed either
alphabetically or by memory location.
4 Turn to view the next entry that
contains the search string.
If a matching Phone Book entry is not
found, this is indicated on the display.
After a few seconds, the standby display
reappears.
CM-Z100/27-43final 3/3/98, 9:43 AM 40