Sony CMD-Z100 - Manual (Page 57)

Advanced F
eatur
es
57
Adjusting the keybeep volume [F23]
You can adjust the volume of the beep that
sounds when you press a button.
1 Turn to select “Keybeep Vol” from
the Sounds menu, then push .
The Keybeep Vol menu appears.
2 Turn up to raise the keybeep
volume, and down to lower it.
You can select from four keybeep
volume settings: “off,” “low,” “med.”
(medium), and “high.”
3 Push to enter the new setting.
The standby display reappears.
Adjusting the earpiece volume [F24]
You can adjust the earpiece volume during a
call by turning
. In addition, you can adjust
the volume as follows:
1 Turn to select “Earpiece Vol” from
the Sounds menu, then push .
The Earpiece Vol menu appears.
2 Turn up to raise the earpiece
volume, and down to lower it.
There are seven earpiece volume settings
ranging from “1” to “7.” A higher
number indicates higher volume.
3 Push to enter the new setting.
The standby display reappears.
CM-Z100/44-68final 3/3/98, 9:44 AM 57