Sony CMD-Z100 - Manual (Page 70)

70
Activating touch dialing [F52]
If you want to use the touch dialing feature
(see page 37), set to “on.”
1 Turn to select “Touch Dial” from
the Extras menu, then push .
The Touch Dial menu appears.
2 Turn to select “on” or “off.”
3 Push to enter the new setting.
The standby display reappears.
Setting the phone to redial
automatically [F53]
You can set the interval for redialing. If the
attempt to dial is not successful, the phone
tries to redial it up to five times every three
seconds.
1 Turn to select “Auto-Retry” from
the Extras menu, then push .
The Auto-Retry menu appears.
2 Turn to select “on” or “off.”
If you select “off,” the phone does not
try to redial automatically.
3 Push to enter the new setting.
The standby display reappears.
CM-Z100/69-86final 3/3/98, 9:46 AM 70