Sony CMD-Z100 User Manual
Page 59
Advertising
Advanced F
eatur
es
59
Setting the keybeep length [F27]
You can set the length of the beep that sounds
when you press a button. This setting affects
both the keybeep feedback and DTMF
transmission tones. The phone sends a short
DTMF burst (default) or plays every tone of
the DTMF signal as long as the key is held
down.
1
Turn
to select “Beep Length”
from the Sounds menu, then
push
.
The Beep Length menu appears.
2
Turn
to select the keybeep
length.
You can select “standard” or “long.”
3
Push
to enter the new setting.
The standby display reappears.
CM-Z100/44-68final
3/3/98, 9:44 AM
59
Advertising