Sony CDX-C5850 - Manual (Page 20)

20
Storing the TV channel
names
Follow the steps in “Storing the station
names” (page 10).
Displaying the TV or radio station
names
Press (LIST) during TV or radio
reception.
Example: When receiving the FM1 band
1 Preset number
2 Stored station names
3 Frequencies*
* If the name of a station is not stored, the
frequency of that station will be displayed
instead.
Notes
• It may take some time before all indications
appear in the display.
• The TV channel does not appear during list
display.
• The contents of the preset memory cannot be
listed when the unit is in simultaneous play
mode (page 21).
Turning off the display
During radio reception, press (LIST)
again.
During TV reception, the list display on the
TV monitor will automatically turn off after
a few seconds.
1
2
3
3
Press (4) (n).
The unit stores TV channels in the order of
their frequencies on the number buttons.
A beep sound when the setting is stored.
4
Press (SHIFT).
Notes
• The unit does not store TV channels with weak
signals. If only a few TV channels can be
received, some number buttons will remain
empty.
• When a preset number is indicated in the display,
the unit starts storing TV channels from the one
currently displayed.
Memorizing only the
desired TV channels
You can store up to 10 channels on the number
buttons in the order of your choice.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Push the SEEK/AMS control up or down
to tune in the TV channel you want to
store on each number button.
3
Keep the desired number button ((1) to
(10)) pressed until you hear a beep
sound.
The number button indication appears in
the display.
Note
If you try to store another channel on the same
number button, the previously stored channel will
be erased.
FM
1
2
3
4
5
6
7
9
1 0
8
W
W
W
W
W
C
B
K
E
R
B
T
V
F
S
U
M
S WR K I S
1
S
L
D
W
W P
Y L
N Y
J
0 1 . 9
0 2 . 7 1
1