Sony GDM-W900 - Manual (Page 31)

13
EN
F
D
ES
I
J
Adjusting the picture
brightness and contrast
The adjustment data becomes the common setting for all
input signals received.
1
Press the ¨./> button or the >?// button.
The “BRIGHTNESS/CONTRAST” OSD appears.
2
Press the ¨./> button to select “PRESET” and the
> ?// button to select a preset number.
When you want to use the monitor later in the same
condition, just select the same preset number.
3
Press the ¨./> button or the >?// button to
adjust the brightness or contrast.
¨ BRIGHTNESS:
Adjusts the picture brightness.
> CONTRAST:
Adjusts the picture contrast.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the ¨./> or >?// button
again.
To reset, press the RESET button while the OSD is on. The
selected preset number is reset.
Adjustments (Expert mode)
OPTION
You can adjust more in detail in the expert mode than in the
normal mode.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select “LANGUAGE” in the “OPTION” OSD, then select
“ENG” (English) on page 8.
Selecting the expert mode
1
Press the OPTION button.
The “OPTION” OSD appears.
2 Press the ¨./> button to select “OSD MENU.”
The “OSD MENU” turns yellow.
3
Press the >?// button to select “EXPERT.”
Move the green p to EXPERT.
EXPERT appears at the top right corner of the OSD in
Expert mode.
The “OPTION” OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
OPT I ON
L ANGUAGE
OSD POS I T I ON :
OSD MENU
LOCK
I NPUT : BNC
JPN ENG FRA
DEU ESP I TA
R I GHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
84.4kHz/ 72Hz
SELECT SET
OPT I ON
L ANGUAGE
OSD POS I T I ON :
OSD MENU
LOCK
JPN ENG FRA
DEU ESP I TA
R I GHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
SELECT SET
I NPUT : BNC 84.4kHz/ 72Hz
BR I GHTNESS / CONTRAST
1
1 0
EXPERT
2 3 BR I GHTNESS
SELECT SET / AD JUST
PRESET 2 3
CONTRAST
OPT I ON
L ANGUAGE
OSD POS I T I ON :
LOCK
R I GHT
SELECT SET / AD JUST
ENG JPN FRA
ESP I TA DEU
BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK
I NPUT : BNC 84.4kHz/ 72Hz
EXPERT