21 3 basic operation, Turning on / off lcd tv, Selecting input source – Sanyo LCD-42CA9S User Manual

Page 16: Channel selection, Channel recall

Advertising
background image

16

Connect LCD TV's AC Power Cord into an AC outlet.

2

1

3

BASIC OPERATION

TURNING ON / OFF LCD TV

Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING LCD

TV".)

Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The

POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by

status, the POWER indicator will become red.

NO SIGNAL SHUT OFF

This TV set incorporates the NO SIGNAL SHUT OFF function. If no signal is input in TV mode, "OFF 00:10"

will display for about 10 minutes and TV will be turned off automatically.

SELECTING INPUT SOURCE

Select mode "PC", "HDMI2", "HDMI1", "TV", "AV1-S",

or "AV2-DVD" by pressing INPUT button on Remote

Control or on Side Controls.

CHANNEL SELECTION

DIRECT SELECTION

There are 256 channels can be selected on the LCD TV.

CHANNEL UP/ DOWN

Press POINT

Ÿź buttons on Side Controls or on Remote Controls to select programs.

O

Press POINT

Ÿ button to select next channel.

O

Press POINT

ź button to select previous channel.

CHANNEL RECALL

Press CHANNEL RECALL button to switch between the previous channel and the current channel.

For example, now you are watching channel "4", but you watched channel "2" previously. If you press

CHANNEL RECALL button, channel "2" will appear immediately.

PC
HDMI2
HDMI1
TV
AV1-S
AV2-DVD

SOURCE

: OK

For direct access to programmes using the (0-9) numeric button.

1) For selection of channel position 0 - 9. Example: For channel position 8, press the “8” button.

2) For selection of channel position 10 - 99. For channel position 25, press the DIGIT button to display "- -",

then press “2” and “5” buttons.

3) For selection of channel position 100 - 199. For channel position 125, press the DIGIT button twice to

display "1 - -", then press “2” and “5” buttons.

4) For selection of channel position 200 - 255. For channel position 235, press the DIGIT button three

times to display "2 - -", then press “3” and “5” buttons.

LCD-CA9S-A NEW.indd 16

2/06/2008 2:08:13 PM

Advertising
This manual is related to the following products: