Sanyo LCD-42CA9S - Manual (Page 35)

35
Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV.
Clean your LCD TV as follows:
Ɣ Gently wipe the screen and cabinet with dry soft cloth.
Ɣ The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard
cloth or paper. Do not use solvents or abrasions.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may
damage the cabinet finish.
AUTO POWER OFF
When a trouble is detected in the LCD TV, the protection function works and turn the LCD TV OFF
automatically. When the LCD TV is turned OFF with this function, the POWER indicator becomes red and
LCD TV's power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the LCD TV or the service center.
To turn on LCD TV again for checking:
1) Disconnect Power cord from AC outlet and plug it on again.
2) Refer to "TURNING ON/OFF LCD TV" on Page 15 to attempt to turn on LCD TV.
If LCD TV is not turned on, disconnect Power cord and contact to service center.
For protecting product safety, protection feature provided inside LCD TV. Refer to the following please.
CLEANING LCD TV
FUNCTION OF PRODUCT SAFETY FEATURE
APPENDIX
LCD-CA9S-A NEW.indd 35 2/06/2008 2:08:43 PM