Sanyo LCD-42CA9S - Manual (Page 26)

26
MENU OPERATION (TV/ AV mode)
Note:
Ɣ TINT cannot be adjusted when HDMI input.
Ɣ TINT cannot be adjusted except in NTSC / NTSC 4.43
system.
PICTURE
Press MENU button and the main menu will appear. Press
POINT
Ż Ź buttons to select "PICTURE", and will display
PICTURE menu.
Press POINT Ÿź buttons to select the item desired.
Press POINT Ż Ź buttons to adjust value.
Select "PERSONAL", "STANDARD", "DYNAMIC" or "SOFT" by
pressing POINT
Ż Ź buttons.
Ɣ PERSONAL: User presets picture adjustment in PICTURE
MODE.
Ɣ STANDARD: Natural and splendid picture level preset on LCD
TV.
Ɣ DYNAMIC: Bright and dynamic picture. It is suitable for nice
playback, such as DVD program.
Ɣ SOFT: Inhibit strong contrast and colour, it is beneficial for eye
protection.
PICTURE MODE
BRIGHTNESS
Press POINT Ż button to adjust image darken, and POINT Ź
button to adjust image brighten. (0~100)
COLOUR
Press POINT Ż button to lighten colour, and POINT Ź button to
darken colour. (0~100)
TINT
Press POINT Ż Ź buttons to obtain proper colour. (0~100)
SHARPNESS
Press POINT Ż button to soften the image, and POINT Źbutton to
sharpen the image. (0~100)
COLOUR TONE
This function is used for selecting colour temperature. Select
"NORMAL", "WARM" or "COOL" with POINT
Ż Ź buttons.
Press POINT Żbutton to decrease contrast, and POINT Źbutton
to increase contrast. (0~100)
CONTRAST
This function is used for reducing noise interference on the screen.
Select "LOW", "MID", "HIGH" or "OFF" with POINT
Ż Ź buttons.
NOISE REDUCTION
COLOUR ENHANCE
This function can adjust seven kinds of colour. They are RED,
GREEN, BLUE, CYAN, MAGENTA, YELLOW and FLESH. Press
POINT
Ź button to lighter colour, and POINT Ż button to darker
colour. (0~15)
SCREEN MENU
1
2
3
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd 26 2/06/2008 2:08:30 PM