Sanyo LCD-42CA9S - Manual (Page 33)

33
MENU OPERATION (PC/HDMI mode)
SCREEN MENU
Press MENU button and the main menu will appear. Press
POINT Ż Ź buttons to select "SYSTEM", and will display
SYSTEM menu.
Press POINT
Ÿź buttons to select the item desired.
Press POINT Ż Ź buttons to adjust value.
ECO
This function can automatically adjust panel's brightness by ambient
brightness.
Press POINT Ż Ź buttons to set "ON" or "OFF".
CHILD LOCK
SYSTEM
This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received PC
signal and in PC mode. (Refer to "SIGNAL MODE COLUMN" on
page 38.)
Press POINT Ż Ź buttons to enter PC SCREEN menu. It can
be select "AUTO", "H-POSITION", "V-POSITION", "CLOCK" or
"PHASE" to adjust.
Press POINT Ż Ź buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance. If the
image is not displayed properly, a manual adjustment is required
(Refer to following adjustments).
The horizontal picture position will be moved to the left side by
pressing POINT Ż button. And it will be moved to the right side by
pressing POINT Źbutton. (0~100)
The vertical picture position will be moved down side by pressing
POINT Ż button. And it will be moved up side by pressing POINT
Ź button. (0~100)
Eliminate flicker from the image. Press POINT Ż Ź buttons to
adjust CLOCK. (0~100)
Eliminate disorder from the image. Press POINT Ż Ź buttons to
adjust PHASE. (0~100)
AUTO ADJUST
H-POSITION
V-POSITION
CLOCK
PHASE
PC ADJUST
When CHILD LOCK is set "ON", the Side Control buttons will be
locked except for POWER ON/OFF button .
1
2
3
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
ECO
CHILD LOCK
PC ADJUST
ECO
CHILD LOCK
PC ADJUST
OFF
ECO
CHILD LOCK
PC ADJUST
OFF
H-POSITION
V-POSITION
CLOCK
PHASE
SEL ADJ BACK EXIT BACK MENU
AUTO ADJUST START
LCD-CA9S-A NEW.indd 33 2/06/2008 2:08:40 PM