Status indicators – Sharp AR-156 User Manual

Page 36

Advertising
background image

34

5

Copier trouble?

STATUS INDICATORS

When the following indicators light up or blink on the operation panel or the following alphanumeric
codes appear in the display, solve the problem immediately referring to both the table below
and the relevant page.

An original misfeed has occurred in the RSPF.
Remove the misfed originals referring to the
description of

Misfeed in the RSPF

.

Steadily
lit

Steadily
lit

Blinking

Blinking

Developer replacement
required indicator

Developer is required. Contact your SHARP
service center as soon as possible.

Replacement of toner cartridge will be needed
soon. Obtain a new cartridge.

A misfeed has occurred. Remove the misfed
paper referring to the description of

Misfeed

removal.

The lower side cover may be open. If so, close
it.

The paper tray is not installed properly.
Push the tray into the copier securely.

_

Toner cartridge must be replaced. Replace it with
a new one.

Toner cartridge
replacement
required indicator

Indication

See
page:

Cause and remedy

CH

is steadily lit in the

display.

The paper tray indicator is
blinking.

CH

is blinking in the display.

Misfeed indicator

Blinking

RSPF misfeed
indicator

The toner cartridge is not installed. Install the
toner cartridge. If

CH

is blinking even if the

cartridge is installed properly, contact your
SHARP service center immediately.

Side cover is open. Close the side cover
securely by pressing the round projections
near the side cover open button.

P

is blinking in the display.

Paper tray or bypass tray is empty. Load copy
paper.

A misfeed has occurred in the paper tray or
bypass tray. Remove the misfed paper.

The copier will not function. Turn the power
switch off, remove the power cord from the
outlet, and contact your SHARP service center.

A letter and a number appear
alternately.

32

_

23

27

30

23

10

_

_

27

_

Service by an authorized SHARP service
technician is required.

Steadily
lit

Maintenance
indicator

32

Be sure to use only genuine SHARP parts and supplies.

Advertising