Sharp AR-156 User Manual
Physical Chemical Characteristics
Boiling / Melting Point: Not applicable
Solubility in Water: Negligible
Fire and Explosion Data
Flash Point (Method Used):
(LEL); Not applicable
(UEL); Not applicable
, dry chemical, foam or water
Special Fire Fighting Procedure:
Unusual Fire and Explosion Hazard: This material has no unusual fire or explosion hazards.
Sensitivity to Mechanical Impact:
Sensitivity to Static Charge:
Incompatibility (Material to Avoid):
CO and NOx
Will not occur.
Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
Use of a dust mask is recommended when handling a large quantity of toner or
during long term exposure, as with any non-toxic dust.
Engineering Control / Ventilation:
Work / Hygienic Practice:
Inhalation should be minimized as with any non-toxic
Steps to be taken in case of Spill or Leak: Sweep up or clean up with vacuum cleaner.
Waste Disposal Method:
Waste material may be dumped or incinerated under
conditions which meet all federal, state and local
NFPA Rating (U.S.A.):
Health = 1
Flammability = 1
Reactivity = 0
WHMIS Legislation (Canada):
This product is not a controlled product.
This product is not a hazardous material.
References: IARC (1996) IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals
to Humans, Vol. 65, Printing Process and Printing inks, Carbon Black and Some Nitro
Compounds, Lyon, pp-149-261
H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J. C.
MacKenzie, P. Morrow, U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary
Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied
Toxicology 17, pp. 280-299