Sony PFV-L10 - Manual (Page 10)

1-4 (E)
PFV-L10
1-5. Disconnecting/Connecting the
Flexible Card Wire
A flexible card wire is used to connect between the
MB-862 board and DUS-213 board.
To fold the flexible card wire shortens its life. Pay careful
attention when handling it.
Disconnecting procedure
n
Do not pull the flexible card wire before unlocking the
connector.
1. Release the lock by pulling two-portion A of the
connector in the direction of the arrow 1. Then
remove the flexible card wire (arrow 2).
Connecting procedure
m
. Make sure that the connector is unlocked.
. The flexible card wire has a conductive portion (in
white) and insulation portion (in blue belt).
Make sure that the direction of the flexible card wire,
before connecting it.
1. While holding portions A with one hand so that the
connector wouldn’t lock, insert the flexible card wire
with the blue surface up as far as it will go.
2. Push portions A of the connector to lock the connector.
1-5. Disconnecting/Connecting the Flexible Card Wire
MB-862 board
1
Portion A
Portion
A
Blue belt
2
2
MB-862 board
1
2
1
Portion A
Portion A
Flexible
card wire