Siemens OPTIPOINT 500 - Manual (Page 48)

Option Adapters and Ports Nur für den internen Gebrauch
P31003-E8400-A100-3-7620
5-2 Service Manual
Configuration Notes
● In large configurations, it may be necessary to use local power supply units, depending on
the power consumption.
● Phone and analog adapters cannot be used together.
● Phone adapters, ISDN adapters, and analog adapters can only be connected to the host.
●
optiPoint 500 entry cannot be configured as the host in a host/client configuration in Hicom
150/HiPath 3000 (including ISDN).
● Whenever making changes to the configuration, disconnect the host telephone from Hi-
com/HiPath. Doing so triggers a reset when the adapter is connected again, providing the
system with the new configuration in the setup message.
● A powered telephone can be connected to the ISDN adapter. When connecting a terminal
that does not have a separate power supply, an additional power supply unit is required.
● By default, the following are not possible in conjunction with a distance adapter (UCON S/
UCON M) in a Hicom 300 or Hicom 300E system:
– client configurations
– configurations with analog adapters and ISDN adapters.
● Only one headset/acoustic adapter is permitted per telephone.
●
USB CAPI can only be connected to the host.