Siemens OPTIPOINT 500 - Manual (Page 50)

Option Adapters and Ports Nur für den internen Gebrauch
P31003-E8400-A100-3-7620
5-4 Service Manual
optiPoint 500 acoustic adapter
5.2 optiPoint 500 acoustic adapter
You can connect the following to this adapter:
● External speakers and desk microphone over Y cable,
●
Cord-connected headset (121 TR9-5) or
● Cordless headset
(121 TR 9-5*) with call acceptance/cleardown function from mobile units,
●
Floating contact
to busy display/door opener and secondary bell/visual paging with own power supply.
It is intended for use with the following systems:
Note on the advance Model
This model has an integrated headset port on the underside of the device.
Notes on the acoustic adapter
● When using an external microphone and an external speaker, the internal components are
switched off in speakerphone mode (sense lead).
● The type of telephone determines the handsfree operation. Microphones which are con-
nected to the acoustic Adapter will not be supported by optiPoint 500 basic. Except for call
signaling, external devices have priority over internal devices.
● In the mute audio function, the internal microphone, the transmitter insets, and a micro-
phone connected to the acoustic adapter are switched to mute.
> A local power supply unit is required when using the acoustic adapter.
basic standard advance
Hicom150 E/150 H ● ●
HiPath AllServe 150 ● ●
HiPath 3000 ● ● ●
Hicom 300 H/300 E ● ● ●
HiPath 4000 ● ● ●