Sony Ericsson BDV-E300 - Manual (Page 33)

33 GB
Ge
tting Star
te
d
12
Press X/x to select the setting for the
Control for HDMI function.
Select [On] to use the [Control for HDMI]
function (page 66) when connecting Sony
components that are compatible with the
Control for HDMI function.
If you do not use the [Control for HDMI]
function, select [Off].
13
Press or c.
The Setup Display for [BD Internet
Connection] appears.
14
Press X/x to select the setting for the
BD Internet connections.
Select [Allow] to allow Internet
connections.
If you do not allow the connections, select
[Do not allow].
15
Press or c.
The Setup Display for [Standby Mode]
appears.
16
Press X/x to select the standby mode.
You can operate the player quickly after
turning on this function.
Select [Quick Start] if you want to shorten
the startup time from the standby mode. The
default setting is [Normal].
Note
• Quick Start mode will increase electricity
consumption in the standby mode.
17
Press or c.
The Setup Display for [Auto Calibration]
appears.
18
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
19
Press X/x to select [Start].
To cancel, select [Cancel].
On
You can operate this unit in conjunction with a TV connected by HDMI.
Check your TV settings when using this function.
Easy Setup - Control for HDMI
Allow
Do not allow
An Internet connection may be required for BD playback.
Allow Internet connections based on BD contents?
Set the "Internet Settings" to allow internet connection.
Easy Setup - BD Internet Connection
EZW
-T10 0
AUDI O
DIGIT AL IN
AUDI O IN
AUDIO IN
A. CA L MIC
ECM -AC2
COA XIAL
OPTIC AL
R
L
R
L
EXT
TV
TV
DIGIT AL IN
SAT/C ABL E
DC5V
500m A MA X
ANTE NNA
FM
COA XIAL 75
Calibration mic