Sony Ericsson BDV-E300 - Manual (Page 71)

O
the
r O
p
erati
ons
71 GB
[Subwoofer]
[Yes]
x [Distance]
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
The speakers in the illustration correspond to the
following:
1 Center speaker
2 Front left speaker (L)
3 Front right speaker (R)
4 Subwoofer
5 Surround left speaker (L)
6 Surround right speaker (R)
7 Surround back left speaker (L) (optional)
8 Surround back right speaker (R) (optional)
[Front Left/Right] 3.0 m: Set the front speaker
distance.
[Center]* 3.0 m: Set the center speaker distance.
[Surround Left/Right]* 3.0 m: Set the surround
speaker distance.
[Surround Back Left/Right]* 3.0 m: Set the
surround back speaker distance.
[Subwoofer] 3.0 m: Set the subwoofer distance.
* This item appears when you set to [Yes] in the
[Connection] setting.
Note
• Depending on the input stream, [Distance] may not
be effective.
x [Level]
You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]
* 0.0 dB: Set the surround
speaker level.
[Surround Back Left/Right]
* 0.0 dB: Set the
surround back speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
* This item appears when you set to [Yes] in the
[Connection] setting.
x [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.
1
Set [Test Tone] to [On].
2
Press X/x to select [Level], then press
.
3
Press X/x to select the desired speaker
type, then press .
4
Press C/c to select the left or right
speaker, then press X/x to adjust the
level.
5
Press .
6
Repeat Steps 3 to 5.
7
Press RETURN.
The system returns to the previous display.
8
Press X/x to select [Test Tone], then
press .
9
Press X/x to select [Off], then press
.
A
A
2
5
7 8
6
1
4
3