Sony Ericsson BDV-E300 - Manual (Page 61)

Externa
l A
u
dio De
vic
e
61 GB
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To use multiple S-AIR main units
You can use multiple S-AIR main units by
setting a different ID for each component.
You can enjoy the system’s sound by using the
S-AIR receiver. The S-AIR receiver can be
placed in another room for enjoying the
system’s sound there.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until “S-AIR
MENU” appears in the front panel
display, then press
or c.
3
Press X/x repeatedly until “S-AIR
MODE” appears in the front panel
display, then press
or c.
Note
• When the wireless transmitter is not inserted in
the unit, “S-AIR MODE” cannot be selected.
4
Press X/x to select the desired setting.
• “PARTY”: The S-AIR receiver outputs
sound according to functions set on the
unit.
• “SEPARATE”: You can set the desired
function for the S-AIR receiver while unit
functions do not change.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Other S-AIR
main unit
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR
sub unit
ID B
S-AIR sub unit
ID A ID B
Enjoying the system’s sound in
another room
For the S-AIR receiver