Sony WEGA KV-34XBR800 - Manual (Page 12)

11
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Item Description
1 S VIDEO
VIDEO 2 INPUT Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (
2 ).
2 VIDEO/L(MONO)-AUDIO-R
VIDEO 2 INPUT Connects to the composite A/V output jacks on your camcorder or other
video equipment.
3 MEMORY STICK Memory Stick insertion slot. For details, see “Using the Memory Stick Picture
Viewer” on page 54.
4 MEMORY STICK LED When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
5 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s
video inputs.
6 -VOLUME + Press to adjust the volume.
7 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and
hold down either
CHANNEL button.
8 TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 77.
9 STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
“Contacting Sony” on page 82).
0 Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
qa POWER Press to turn on and off the TV.
34XBR.book Page 11 Wednesday, April 24, 2002 3:15 PM