Sony WEGA KV-34XBR800 - Manual (Page 32)

31
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR must be turned on and set to the satellite receiver’s line input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the satellite
receiver or VCR For the satellite receiver, press SAT/CABLE FUNCTION . For the VCR, open the
outside cover, as shown on page 42. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control See “Operating a Satellite Receiver” on page 61 and “Operating a VCR” on
page 61.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 76.
34XBR.book Page 31 Wednesday, April 24, 2002 3:15 PM