Sony WEGA KV-34XBR800 - Manual (Page 24)

23
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels Press TV/VIDEO repeatedly to select the cable input (VHF/UHF in the
illustration).
Set up the TV remote control
to operate the VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the VCR Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the VCR.
Control VCR functions with
the TV remote control See “Operating a VCR” on page 61.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 76.
34XBR.book Page 23 Wednesday, April 24, 2002 3:15 PM