Sony WEGA KV-34XBR800 - Manual (Page 26)

25
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch cable (unscrambled)
channels Press TV/VIDEO repeatedly to select the cable input (UHF/VHF in the
illustration).
Watch cable box (scrambled)
channels Turn on the VCR and tune it to the channel the cable box is set to (usually
channel 3 or 4). Press
TV/VIDEO repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the cable box or
VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 43-44.
Activate the remote control to
operate the cable box or VCR For the cable box, press SAT/CABLE FUNCTION . For the VCR, open the outside
cover, as shown on page 42. Then set the A/V slide switch to the position
you programmed for the VCR.
Control specific cable box and
VCR functions with the TV
remote control See “Operating a Cable Box” on page 62 and “Operating a VCR” on page 61.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 76.
CATV
Coaxial
cable
A/V cable
cable
Splitter
(not supplied)
Coaxial
cable
TV
Cable box
VCR
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
34XBR.book Page 25 Wednesday, April 24, 2002 3:15 PM