Sony WEGA KV-34XBR800 - Manual (Page 47)

46
SETU
P
SETU
P
S
E
TU
P
Feat
ur
es
S
E
TU
P
SETU
P
Watching TV
To Do This ... Do This ...
Activate the remote control to
operate the TV Press TV FUNCTION
Turn on/off the TV Press TV POWER
Tune directly to a channel Press 0-9 and then ENTER (or wait 3
seconds) or
Press
CH+/-
Adjust the volume Press VOL +/-
Mute the volume Press MUTING (press again to unmute)
Alternate back and forth
between two channels Press JUMP
The TV alternates between the current
channel and the last channel tuned.
Display the current channel
number (and other information) Press DISPLAY once to display the channel
number,current time, and channel label (if
set). Press
DISPLAY again to turn Display
off.
Switch the TV’s input to the
VCR, DVD player, or other
connected equipment Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TV’s video inputs.
Change video and audio
options, customize the TV’s
setup, set parental controls, and
more Press MENU to display the Menu. For
details, see “Using the Menus” on
page 63.
Switch the TV’s input between
sources connected to the TV’s
VHF/UHF and AUX inputs
Press ANT to alternate between sources
connected to the TV’s VHF/UHF and
AUX inputs.
For a complete list of all
the functions of the remote
control, see pages 39-44.
z
34XBR.book Page 46 Wednesday, April 24, 2002 3:15 PM