SMC Networks Barricade SMC7004VWBR V.2 - Manual (Page 20)

Configuring Client TCP/IP
16
Note: These settings may be changed to suit your network
requirements, but you must first configure at least one
computer as described in this chapter to access the
Wireless Barricade’s Web configuration interface.See
“Configuring the Wireless Barricade Router” on page
27 for information on configuring the Wireless
Barricade.)
If you have not previously configured TCP/IP for your computer,
refer to“Configuring Client TCP/IP” on page 13. The IP address
of the connected client PC should be 192.168.2.x (where x
means 2–254). You can set the IP address for client PCs either
by automatically obtaining an IP address from the Wireless
Barricade’s DHCP service or by manual configuration.
Configuring Your Computer in Windows 95/98/Me
You may find that the instructions here do not exactly match your
version of Windows. This is because these steps and
screenshots were created in Windows 98. Windows 95 and
Windows Millennium Edition are very similar, but not identical, to
Windows 98.
1. From the Windows desktop, click Start/Settings/Control
Panel.
2. In the Control Panel, locate and double click the Network icon.