SMC Networks Barricade SMC7004VWBR V.2 - Manual (Page 62)

Configuring the Wireless Barricade Router
58
Use this section to create your network schedule rules.
The times you set below are the times periods that you want the
Access Control Rule to be active. For example, if you want to
block Internet access (block WWW) from 9AM to 9PM during the
week. Simply configure 9:00 AM as “Start Time” and 9:00 PM as
“End Time” for each weekday - during that time period the user
will be unable to access the internet.
Once the schedule rule is setup, you will need to configure or edit
an Access Control rule, and select your Schedule Rule that you
want to apply to that Access Control rule. You can set the
schedule rule at the bottom of the Access Control Configuration
page in the “Scheduling Rule” drop-down option.