SMC Networks Barricade SMC7004VWBR V.2 - Manual (Page 40)

Configuring the Wireless Barricade Router
36
Advanced Setup
Use the Web management interface to define system
parameters, manage and control the Wireless Barricade and its
ports, or monitor network conditions. The following table outlines
the selections available from this program.
Menu Description
System Sets the local time zone, the password for administrator access,
and the IP address of a PC that will be allowed to manage the
Wireless Barricade remotely.
WAN Specifies the Internet connection type:
• Dynamic IP host configuration and the physical MAC address
of each media interface
• PPPoE configuration
• PPTP
• Static IP and ISP gateway address
• BigPond (Internet service available in Australia)
• Specifies DNS servers to use for domain name resolution.
LAN Sets the TCP/IP configuration of the Wireless Barricade’s LAN
interface and all DHCP clients.
Wireless Configures the radio frequency, SSID, and encryption for
wireless communications.
NAT Shares a single ISP account with multiple users, sets up virtual
servers.
Firewall Configures a variety of security and specialized functions,
including: Access Control, Hacker Prevention, and DMZ.
DDNS Dynamic DNS provides users on the Internet with a method to
tie their domain name(s) to computers or servers.
UPnP With Universal Plug and Play, a device can automatically
dynamically join a network, obtain an IP address, communicate
its capabilities, and learn about the presence and capabilities of
other devices. Devices can then directly communicate with each
other. This further enables peer to peer networking.
Tools Contains options to backup & restore the current configuration,
restore all configuration settings to the factory defaults, update
system firmware, or reset the system.