Sharp R520_CJ16_MM_111009_F4 - Manual (Page 109)

Tools 106
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
The phone prompts you to confirm digit reset.
2. Press the OK soft key to reset the digit adaptation. Press
the Back soft key to cancel.
Sound
Sound lets you specify what (if any) text prompts you want the
phone to read to you through the earpiece.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
• Prompts — Enables (On) or disables (Off) playing of prompts.
• Digits — Enables (On) or disables (Off) playing of digits.
• Names — Enables (On) or disables (Off) playing of names.
• Name Settings — Lets you adjust the speed and volume of the
phone’s audio name playback.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
• Key Only — Press and hold to activate VoiceSignal for one
call.
• Key/Ear Mic — Attach a headset to the phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
• Key/Slide — Press the key to activate VoiceSignal for
repeated calls. Open and close the slide to make and end calls
using VoiceSignal. Press
to release VoiceSignal.
2. Select the Voice Launch option you want.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on the phone.
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
The About Nuance screen appears in the display showing
the version level of the VoiceSignal software currently
installed on the phone.