Sharp R520_CJ16_MM_111009_F4 - Manual (Page 111)

Tools 108
2. Select an Alarm. A Set Alarm screen appears in the display
containing the following options:
• Alarm
• Time
• Frequency
• Ringer
3. Highlight the options you wish to change, then select
values for the options using the Left and Right navigation
keys.
To enter the Time for the alarm, use the keypad.
4. When you’re finished entering and selecting values for the
alarm, press . The alarm is set and the alarm icon
( ) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
ᮣ To silence the alarm, use the Navigation key to select
Dismiss.
• If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
• If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
• If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Turn Off the Alarm
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for reuse.
1. At the Tools menu, select Alarm Clock.
2. Highlight Alarm 1 / Alarm 2 / Alarm 3.
3. Press the Options soft key and select Off. The highlighted
Alarm is turned off, but the alarm settings are retained for
later reuse.
Reset the Alarm
Resetting one or all Alarms erases all of the Alarm settings and
restores the default settings.
1. At the Tools menu, select Alarm Clock.
2. If desired, highlight Alarm 1 / Alarm 2 / Alarm 3.