Sharp R520_CJ16_MM_111009_F4 - Manual (Page 119)

Changing Your Display Settings 116
Dialing Font Size
Lets you select the size of the dialing font.
1. At the Display menu, select Dialing Font Size . You can
choose between Normal and Large.
2. Select the desired setting.
Banner
Create your own personalized greeting to appear in the display
while your phone is in Standby mode.
1. At the Display menu, select Banner.
Tip: Press and hold to erase an existing banner, if necessary.
2. Enter a word or short phrase to appear in your phone’s
display while in Standby mode (Up to 18 characters). (For
more information, refer to “Entering Text” on page 35.)
3. Press to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
Note: Prolonged backlight use drains your battery faster.
1. At the Display menu, select Backlight . The following sub-
menus appear in the display:
• Main Display — Sets how long the display backlight remains on
after a period of inactivity. Optional settings are: 7 seconds, 15
seconds, 30 seconds, Always On, and Always Off.
• Keypad — Sets how long the keypad backlight remains on after a
period of inactivity. Optional settings are: 7 seconds, 15 seconds,
30 seconds, Always On, and Always Off.
• Charging — Sets how long the display backlight remains on while
charging the battery. Optional settings are: 7 seconds, 15
seconds, 30 seconds, Always On, and Always Off.
• Brightness — Sets the brightness of the backlight to one of five
possible settings.
2. Select the desired sub-menu, then select the desired
setting.