Sharp R520_CJ16_MM_111009_F4 - Manual (Page 8)

5
Installing the Battery
Note: The phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use the
phone, otherwise you could damage the battery.
1. Insert the top end of the battery first, matching the gold
contacts on the top of the battery to those inside of the
phone battery compartment.
2. Lightly press the bottom end of the battery down into the
phone until it slips into place.
3. Place the battery cover over the battery and (1) gently
press down, then (2) slide the cover forward until it clicks
into place.
Removing the Battery
1. Press and hold to turn off the phone (if on).
2. Slide the cover toward the top end of the phone. Lift the
cover up and away from the phone, bottom end first.