Strahl D1600mkII - Manual (Page 102)

94
5. Rename
If you select “U:USB DOS” as the “Drive,” you can edit
the backup-destination filename. For details, refer to “2.
Naming a song” (→p.35).
You can input a filename of up to eight characters.
You may not use symbols or lowercase characters.
6. Exec. (Execute) ...........................................................
Executes the backup.
Effect user data will also be backed-up at this time.
B-U/Rst Type: Backup All Songs
This operation backs-up the song drive of the hard disk and
the effect user data. This data can be saved only to a CD-R/
RW disc.
2. Source ................................................................(ALL)
Indicates that all songs will be backed-up.
3. Drive ............................................................ [S, C, U]
Selects the backup-destination drive.
For this operation, select C:CD.
4. Destination.......................................... (C:CDx01...99)
Shows the backup-destination drive and drive informa-
tion (C:CD x the number of discs required)
5. Exec. (Execute) ...........................................................
Executes the backup. Effect user data will also be backed
up at this time.
5a. Speed ..................................................................
When backing up to CD-R/RW, you can specify the
writing speed.
Press the “Yes” button to begin the backup.
B-U/Rst Type: Backup User Data
This operation backs-up effect user data.
CD-R/RW
: You can back up all effect user data in a single
operation.
USB drive
: You can back up all effect user data in a single
operation, or back it up individually.
2. SourceEffNo......... (EffAll, Ins001...128, Mst001...032,
Fin033...064)
Shows the backup-source effect number. You can select
“EffAll” only if you are backing up to the CD-R/RW
drive.
EffAll
: All effect user data
Ins001...128 : Insert effect user data
Mst001...032 : Master effect user data
Fin033...064 : Final effect user data
3. Drive .............................................................[S, C, U]
Selects the backup-destination drive.
For this operation you can select “C” or “U”.
For details on the drive, refer to “B-U/Rst Type: Backup
1 Song” (→p.93).
4. Destination ..................................(C:CD, U:EffctName)
Shows the backup-destination drive and drive informa-
tion (C:CD or U:filename).
Normally if you set “SourceEffNo.” to “EffAll,” the
filename will be “currently selected song name.DFX”. If
you select an individual effect for backup, the filename
will be “backup-source effect name.DFI/DFM/DFF”.
You must use a blank disc when backing up to CD-
R/RW.
5. Rename .....................................................................
If “Drive” is set to “U:USB DOS,” you can edit the
backup-destination filename. For details, refer to “2.
Naming a song” (→p.35).
You can input a filename of up to eight characters.
You may not use symbols or lowercase characters.
6. Exec. (Execute) ...........................................................
Executes the backup.
4
5
2
3
4 5
6
2
3