Strahl D1600mkII - Manual (Page 125)

117
COUNTER
Reference
SYSTEM /
USB
RECORD
TRACK
SONG /
CD
STORE
MARK
SCENE
TEMPO / RHYTHM
IN / LOC1... END / LOC4
AUTO PUNCH
LOOP
UNDO
TRIGGER
SCRUB
ENTER
INPUT / TUNER
EQ / PHASE
INSER
T
FX
MASTER FX / AUX
SOLO / MONITOR
METER / Tr VIEW
Tr
ST
ATUS
PA
N
FADER
TRANSPORT
2f. Insert ...................................................... [On, Off]
On: When you create a new tempo map event, it
will be inserted. Turn this on if you want to add a pat-
tern to the specified measure(s).
Off: When you create a new tempo map event, it
will overwrite the existing tempo map event. Turn this
off if you want to replace the pattern for the specified
measure(s).
3. Edit............................................................................
Here you can edit the settings of a tempo map.
Select this when you wish to modify an existing map.
Use “TempoMap” to select the map that you wish to
modify, and then press this button.
The “Select TempoMap*** Param” dialog box will
appear, and you can set the desired values. (→”2. New”)
4. Delete ........................................................................
This deletes a tempo map.
4a. SelectAll................................................. [On, Off]
All tempo maps will be subject to deletion.
On : All tempo maps will be subject to dele-
tion. The tempo map number will be shown as “***.”
Off : The single tempo map selected by
“TempoMap” will be subject to deletion.
All tempo maps following the deleted tempo map
will be moved forward.
5. Pattern Length, Pattern Position...................................
This shows the number of measures (length) of the pat-
tern selected by “SelRhythm,” and the measure number
that is currently playing.
P3 TmpTrk: Create a tempo track
You can record the tempo track in either of the following
two ways.
• Record MIDI clock
You can record MIDI clock messages to synchronize the
D1600mkII with data created on an external sequencer.
• Record tap tempo
If you do not know the tempo of the audio recorded on
the D1600mkII, you can record tap tempo so that you will
be able to manage the data and perform track editing in
units of measures.
For the procedure of creating the tempo track, refer to
“Tempo track” (→p.73).
Since these two types of tempo tracks are recorded in the
same area, it is not possible for both tempo tracks to exist
simultaneously.
If memory becomes full during recording, recording
will end.
1. Select RecTempoTrack Type .........[MIDIClock, MeasTap,
BeatTap]
Select the type of tempo track.
MIDIClock
: The tempo track will be created by record-
ing MIDI Clock data from a song that was created on an
external sequencer.
MeasTap
: The tempo track will be created by recording
taps at the beginning of each measure.
BeatTap
: The tempo track will be created by recording
taps at the beginning of each beat.
2. RecStart .....................................................................
Begin recording the tempo track.
4a
1 2
TEMPO / RHYTHM