Strahl D1600mkII - Manual (Page 97)

89
Creating/
selecting a song
Assign audio inputs
to the mixer
Basic
operation
Recording
Playback
Changing the time location
Using the
mixer
Using ef
fects
Mixdown
Tr
ack
editing
Song editing
Rhythm/tempo
settings
Data
Drive
USB
Updating the system
MIDI
Using MIDI to control the D1600mkII mixer
Here’s how the mixer control data recorded in
“Recording D1600mkII mixer control operations” can be
transmitted back to the D1600mkII to control its mixer.
Make the same connections as in “Controlling the
D1600mkII from a MIDI sequencer.”
1. Make synchronization settings for the D1600mkII
and the external MIDI sequencer.
Make the settings in step 1 of “Recording D1600mkII
mixer control operations.”
2. Enable control change reception on the D1600mkII.
In the [SYSTEM/USB] “MIDI” tab page, turn the
“Mixer Control” parameter “Control Change: Recv”
to “ON.”
3. Put the external MIDI sequencer in playback-ready
mode.
4. Begin playback on the D1600mkII.
When you press the D1600mkII’s [PLAY] key to begin
playback, the external MIDI sequencer will also begin
playback in synchronization. The previously-
recorded mixer control data will be transmitted from
the MIDI sequencer, causing the D1600mkII mixer
settings to change.
MIDI