Strahl D1600mkII - Manual (Page 86)

78
Backing up to the USB drive
Here’s how to back up user area insert effect “U055” to
the USB drive.
1. Select “BackupUserData.”
In the [SYSTEM/USB] “B-U/Rst” tab page, select “B-
U/RstType,” and turn the [VALUE] dial to select
“BackupUserData.” Alternatively, you can press the
“
” button to open the “Select Backup/Restore
Type” dialog box and make your selection there.
2. Select “U:USB DOS” as the backup-destination
drive.
Press the “Drive” button to open the dialog box.
Choose “U:USB DOS” and press the “Yes” button.
3. Select the effect that you want to back up.
Move the cursor to “Source,” and use the [VALUE]
dial to select “Ins055.”
4. Verify the backup-destination drive and filename.
The name of the effect you are backing up will be the
filename. Make sure that “U:(effect name)” is selected
as the “Destination.”
5. Edit the filename.
Press the “Rename” button, and use the “Rename-
File” dialog box to edit the filename. (→p.35)
If a file of the same name already exists on the
USB drive, you will not be able to save. Please
change the name.
If you select all effects “EffAll,” the name of the
currently selected song will be the name of the
effect user data file.
6. Execute the backup.
Press the “Exec.” button to display the confirmation
screen.
Here you can specify a date (timestamp) for the file.
Press the “Date” button to open the dialog box, select
the date and time fields, and use the [VALUE] dial to
edit them.
Press the “Yes” button and the backup will begin.
Restoring effect user data
To restore
1. When restoring from CD-R/RW, insert the disc into
the CD-R/RW drive.
2. Select “Restore.”
In the [SYSTEM/USB] “B-U/Rst” tab page, select “B-
U/RstType,” and turn the [VALUE] dial to choose
“Restore.” Alternatively, you can press the “
” but-
ton to display “Select Backup/Restore Type” and
make your selection.
3. Select the restore-source drive.
Press the “Drive” button to open the dialog box.
Select “C:CD[B]” or “U:USB DOS,” and press the
“Yes” button.
4. If you are restoring from the USB drive, select the
effect user data that you want to restore.
Press the “
” button.
From the “BackUpFileList,” select the effect that you
want to restore.
For details on the file types, refer to p.75.
Press the “Yes” button.
5. Verify the restore-destination.
If you are restoring all effect user data, the display
will indicate “***”.
If you are restoring individual effect user data, select
the restore-destination effect number. Move the
cursor to “Destination,” and use the [VALUE] dial to
make your selection.
6. Execute the restore.
Press the “Exec.” button.
The display will ask “AreYouSure?”, so press the
“Yes” button to execute.
7. When execution is completed, the display will
indicate “Completed.” Press the “Yes” button.
Destination Source B-U/RstType
Destination Source B-U/RstType