Sanyo DP32746 - Manual (Page 11)

11 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
CONNECTING EXTERNAL EQUIP-
MENT TO HDMI (INCLUDES HDCP
COPY PROTECTION)
To avoid problems with some brands of exter-
nal equipment, follow this procedure when
connecting cables and powering on your equip-
ment.
What you will need for connections:
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin configura-
tion of the cable plug-end*)
*Adapter may be required. Check with
your local electronics store.
DIGITAL AV CONNECTIONS
REMOTE CONTROL
SET-TOP BOX (Can be a Digital Satellite Receiver,
DVD Player , or similar digital device.)
BACK VIEW
OF DTV
1 Switch off DTV and external equipment
before connecting cable.
(Cable is not
supplied.)
2 Connect the external equipment’s high
bandwidth HDMI Output to the DTV’s
HDMI Input.
3 The DTV must be turned on first, press
POWER. Then turn on your external
equipment.
4 Press INPUT to select
HDMI to view a digital
program.
HDMI CABLE
(Gently insert
cable into
DTV HDMI
Input jack.)
4
2
3
■
If the television HDMI pin configuration is different from
the pin configuration on your set-top box, you will need to
use an Adapter.
■
Press the INPUT key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
This is the best option for picture and sound! Using the HDMI connection,
which has high-definition content protection, provides you with uncom-
pressed digital video and audio, Dolby
® Digital 5.1 or PCM sound. This
connection requires only one cable. As Real As It Gets!