Sanyo DP32746 - Manual (Page 19)

19 Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Sleep Key—Press this key, then press the
“0” key to set the Sleep Timer. The desired
time can be set from 30 minutes up to 3
hours in 30 minutes increments. Sleep Timer
will switch off the DTV automatically.
NOTE: The Sleep Timer cancels when the DTV is
turned off or if a power failure occurs.
Mute Key—Press once to minimize the
volume. Press again to restore.
NOTE: This key will not mute sound from the
audio out jacks .
Enter Key—Press this key to select an option
from the menu system, when required.
. Cursor
▲ (up) ▼ (down) keys—Press these
keys to move the cursor up and down within
the menu.
Cursor
<
(left)
>
(right) keys—Press these
keys to move the cursor left and right within
the menu.
Exit Key—Press this key to exit from the
menu system.
Volume (VOL – +) Keys—Press the – + keys
to adjust volume. The screen displays a left or
right red arrow that blinks as many times as
you press the Vol – + keys.
Reset Key—Press twice to restore factory
settings. The DTV will automatically start
Channel Search and clear all customized
settings.
NOTE: The Reset Function includes a channel
search. Current Digital and Analog channel
databases will be deleted and new ones
created by the Channel Search process. To
receive Digital Cable channels, see page
21 for Digital Cable Search.
These features will reset to factory defaults:
• Picture / Sound Adjustments: Color, Tint,
Contrast, Brightness, Sharpness, and Tone
• Channel Memory—Digital /Analog channel
databases will be replaced
• Analog Audio to Stereo
• Captioning to OFF
• V-Guide to OFF
• Menu Language to English
• Sleep Timer to OFF (if previously set)
• Any Video mode to DTV mode
If desired, personal settings can be made
again using the menu options.
➉
12
13
14
11
➈
16
15
17
18
➇
➃
➄
➅
➆
12
13
14
16
15
17
18
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.